If you own a Fisher & Paykel dryer and suddenly see Error Code 151, you’re not alone. Many users search online for solutions to this frustrating issue, often typing queries like:
“Fisher Paykel dryer code 151 reset button” or “How to fix dryer error 151”.
This article provides a comprehensive guide to understanding error code 151, whether a reset button exists, how to safely troubleshoot your dryer, and when to contact professional service. By the end, you’ll have a clear path to resolving this issue and getting your dryer back in working order.
What Does Fisher & Paykel Dryer Error Code 151 Mean?
H3: Understanding Error Code 151
Error code 151 on a Fisher & Paykel dryer generally refers to a motor-related fault, commonly indicating that the dryer motor is not functioning properly or failing to start. The code may appear as:
- Fault Code: 151
- E151
- Motor Start Failure
This error may be triggered by:
- An overheated motor
- Obstruction in the drum
- Electrical connection problems
- A faulty motor control board
- Voltage fluctuations
Understanding this code is crucial because continuing to use the appliance in this state may cause further damage or void the warranty.
H3: Dryer Models Affected
While the code appears in several Fisher & Paykel dryer models, it’s most common in:
- AeroSense Series
- DE6060 models
- DE8060P2 (Heat Pump Dryers)
- DE7060G2 (Vented Dryers)
Check your user manual for model-specific fault definitions if you’re unsure.
Is There a Reset Button on Fisher & Paykel Dryers?
H3: The Truth About the “Reset Button”
Many users assume there’s a physical reset button on the dryer to clear the error, but the truth is:
Fisher & Paykel dryers do not typically have a dedicated “reset button.”
Instead, resetting the machine involves a specific power cycling process or using diagnostic mode via the control panel.
H3: How to Perform a Basic Reset (Power Cycle)
Follow these steps to attempt a basic reset:
- Turn off the dryer completely using the power button.
- Unplug the dryer from the wall outlet.
- Wait 10–15 minutes to allow internal components to fully discharge.
- Check the filter and lint trap for obstructions.
- Plug the dryer back in and power it on.
This simple reset may clear temporary electronic glitches that cause error 151.
H3: Circuit Breaker Reset Option
In homes where the dryer is hardwired:
- Locate the circuit breaker on your electrical panel.
- Turn off the breaker that supplies power to the dryer.
- Wait at least 5–10 minutes, then switch it back on.
This method can achieve a similar result to unplugging and helps ensure a full electrical discharge.
How to Troubleshoot Error Code 151 on Your Dryer
H3: Step-by-Step Troubleshooting Guide
If the reset doesn’t work, follow these steps:
1. Inspect the Drum Movement
- Open the dryer door.
- Try to manually rotate the drum. It should spin freely.
- If it’s stiff or stuck, there may be an object or mechanical jam.
2. Check the Lint Filter and Airflow
- A clogged filter can cause the motor to overheat and fail to start.
- Remove and clean the lint filter thoroughly.
- Check the vent hose for kinks or obstructions.
3. Examine the Power Supply
- Ensure the dryer is plugged into a dedicated outlet.
- Avoid using extension cords or power strips, which may limit voltage supply.
- Check for flickering lights or power fluctuations in your home.
4. Motor Overheating
- If the dryer was used continuously, the motor may have overheated.
- Let the dryer sit unplugged for 30–60 minutes to cool down.
5. Try a Diagnostic Test (If Available)
Some models allow a diagnostic mode that provides more detail on faults. Refer to your user manual or try this generic sequence:
- Press and hold both the keylock and delay start buttons for 3–5 seconds until the display changes.
- Scroll through diagnostic codes to identify deeper issues.
When to Call a Technician or Fisher & Paykel Support
H3: Signs You Need Professional Help
If the error persists after all troubleshooting steps, the problem may involve:
- Faulty motor windings
- Burnt capacitor
- Defective control board
- Sensor malfunctions
These parts require professional tools and skills to test or replace.
Contact Fisher & Paykel Customer Care:
- Phone (USA/Canada): 1-888-936-7872
- Website: https://www.fisherpaykel.com
- Use the chat support feature or submit a service request online.
H3: Check Warranty Status
Before scheduling a technician:
- Check your dryer’s warranty card or the Fisher & Paykel website using your model and serial number.
- Most dryers have a 2-year manufacturer warranty, with extended options for parts like the motor or drum.
A warranty claim may cover the repair cost, especially if your dryer is less than 3 years old.
Preventing Fisher & Paykel Dryer Error 151 in the Future
H3: Maintenance Tips to Avoid Motor Errors
To reduce the chances of error 151 recurring:
✔ Clean the lint filter after every cycle
Built-up lint restricts airflow, causing the motor to overheat.
✔ Vacuum behind and under the dryer monthly
Dust and lint accumulation around vents can stress the motor.
✔ Avoid overloading
Consistently drying large or heavy loads wears the motor out faster.
✔ Allow cool-down periods between large drying sessions
Back-to-back drying cycles can trigger thermal cutoffs or overheat errors.
✔ Check venting annually
Have your dryer vent professionally cleaned to maintain proper air circulation.
H3: Use Correct Settings for Each Load
Different load types (towels, delicates, synthetics) require different heat levels and durations. Using the wrong settings can overwork the motor or sensors.
Refer to the dryer’s control panel guide or user manual for setting recommendations.
Conclusion: How to Handle Fisher & Paykel Dryer Code 151 with Confidence
Error code 151 on a Fisher & Paykel dryer can be alarming, but it’s often caused by simple issues like overheating, power irregularities, or airflow blockage. While there is no dedicated reset button, a manual reset via power cycling often clears the fault.
If the issue persists after resetting and inspecting your dryer, it may be time to contact Fisher & Paykel support or a certified technician. Always prioritize safety, especially when dealing with electrical appliances.
By following the tips in this guide, you can troubleshoot error 151, avoid future issues, and ensure your dryer runs efficiently for years to come.
✅ Quick Reference Summary
Problem | Solution |
---|---|
Code 151 appears | Indicates motor startup failure |
Reset button? | No physical button; do a power reset |
First step | Unplug dryer for 15 mins, then restart |
Still broken? | Check drum, filter, airflow, power supply |
Need help? | Call Fisher & Paykel support |
Long-term tip | Clean vents, avoid overloading, monitor heat |